Warehousing, wholesale and distribution · OD-01 · Making full use of warehouse capacity
Little new space. Existing space is full.
International organisations estimate that demand for modern warehousing in Uzbekistan exceeds supply several times over, while existing warehouses are almost full. Under these conditions, knowing where each pallet position is and how well it is used translates directly into money.
Platform: Goods Flow
World Bank estimate of Class A warehouse demand in 2025. Actual supply is 513,000 m².1
Average warehouse occupancy in 2024, according to the World Bank; 98% in Tashkent and Namangan.1
Vacancy rate in Class A warehouses, according to IBC Global.2
Building a new warehouse takes years. Organising an existing one takes months.
Who it is for
- Warehouse owner
- Occupancy of floor space and pallet positions.
- Warehouse manager
- Speed of receiving, put-away and picking.
- Logistics director
- Rental and storage costs.
- Finance director
- Cost per pallet position.
Where the problem lies
Pallet positions have no addresses
Goods are placed in "any free spot" and then searched for later. Only the storekeeper knows which positions are occupied and which are free.
Fast-moving goods are stored far away
When goods shipped many times a day are stored deep inside the warehouse, picking and loading take longer.
Stock and location are recorded separately
1C shows the quantity, but not where in the warehouse it is located. Stocktaking takes a long time.
Occupancy is not measured
It is impossible to say what percentage of the warehouse is occupied or how much space each client or product takes up.
How the loss is calculated
| Cost per position | monthly rent or cost (per month) / number of occupied pallet positions |
|---|---|
| Search time | search time per employee per day (min) / 60 × number of staff × hourly labour cost |
| Picking time | time per order (h) × orders per day × hourly labour cost |
| Stocktaking | warehouse shutdown days per year × daily turnover |
Calculate with your data
Warehouse Pallet Search: Labour Time Cost Estimate
This calculator estimates the monthly cost of the time staff spend searching for pallets.
Use spaces for thousands and a dot or comma for decimals. Use the same currency throughout.
Values stay in this page and are not sent to the server.
Scenario estimate
0 / 5 values entered
Enter your operating figures to see the estimate.
The scenario search time is your target, not a guaranteed outcome. This calculation values freed-up time. Cash savings arise only when payroll, overtime or external service costs actually fall. Additional capacity must be assessed separately. Scope, price and schedule require a site assessment. Do not count the same loss twice.
Formulas and assumptions
This calculator estimates the monthly cost of the time staff spend searching for pallets. It compares the current state with a scenario that you define, for example after putaway is controlled through WMS and handheld terminals. The cost period is one month. Enter all values from your own measurements, such as handheld terminal logs or time studies. Rent, cost per pallet position, picking time, stocktaking downtime, implementation costs and rework are excluded. Results are estimates, not guarantees.
- Current: monthly cost of searching
- Daily search minutes (minutes) are multiplied by the number of employees and divided by 60 to convert to hours. The result is then multiplied by the hourly cost (currency/hour) and by working days per month.
- Scenario: monthly cost of searching
- The calculation is the same as for the current state, but uses your target daily search minutes. Employees, hourly cost and working days stay unchanged.
- Monthly difference in labour time cost (estimate)
- Current monthly labour-time cost minus scenario cost, with a minimum of zero. This values freed-up time; it is a cash saving only if payroll, overtime or external service costs actually fall.
- Current: search hours per month
- Daily search minutes are multiplied by the number of employees, divided by 60 and multiplied by working days per month. The result is total hours across all employees.
Facts and global practice
World Bank
In 2025, demand for Class A warehouse space was 4 million m²; actual supply was 513,000 m².1
World Bank
Average warehouse occupancy in 2024 was 95%, and 98% in Tashkent and Namangan.1
World Bank
At least 2 million m² of modern warehouse space is needed by 2030 to meet freight transport targets.1
IBC Global
Supply of quality Class A and B warehouse space is 795,000 m², Class A vacancy is 1.5%; the shortage of quality warehouse space is approximately 400,000 m².2
IBC Global
35% of new warehouse demand comes from e-commerce and marketplaces, and 28% from 3PL and distribution.2
Commonwealth Partnership (CMWP), 2024 review
The first Class A warehouses in Tashkent opened in 2024; Class A vacancy was expected to fall to zero.3
The World Bank and IBC Global measure warehouse space differently, so their figures do not match. Both reach the same conclusion: modern warehouse space is in short supply and existing warehouses are full.
Every pallet position in the system
The warehouse is divided into addressed locations, and every pallet and position is confirmed by scanning. The system suggests put-away locations based on product turnover rate.
- 01Receiving
- Pallet ID
- Location suggestion
- Confirmation via handheld terminal (TSD)
- 02Put-away
- ABC analysis
- Fast movers kept close
- Relocation
- 03Capacity
- Pallet position map
- Occupancy %
- Space by client
- 04Reporting
- Turnover
- Stocktaking
- 1C stock balance
Modules
The current maturity level is shown next to each module.
| WMS: receiving, put-away, picking, shipping | Addressed storage and tasks | Commercially available |
|---|---|---|
| TSD app | Scan confirmation of every operation | Commercially available |
| Warehouse map and occupancy reports | Occupancy by location, client and product | Commercially available |
| 1C integration | Synchronisation of documents and stock balances | Commercially available |
How we start
- 01
Warehouse audit
Floor space, pallet positions, processes and product turnover are measured.
Outcome: occupancy and loss map.
- 02
Addressing
The warehouse is divided into zones and pallet positions.
Outcome: every position in the system.
- 03
Launch
WMS and TSD in one zone first, then across the entire warehouse.
Outcome: operations confirmed by scanning.
- 04
Subscription and monitoring
Monthly report; put-away rules are updated.
Outcome: occupancy and speed trends.
What is measured
| Occupancy | Occupied pallet positions / total | WMS |
|---|---|---|
| Put-away accuracy | Share of pallets placed in the location suggested by the system | WMS, TSD |
| Picking time | From order receipt to completed picking | WMS |
| Stocktaking discrepancy | Difference between the system and the accounting records | WMS, 1C |
| Search incidents | Number of pallets not found | TSD log |
What is needed to start
- Person responsible for the warehouse
- Warehouse layout and list of racks
- Product and turnover data
- Test access to 1C
What we do not promise
- Exact timeline and price without an audit
- Government decisions and deadlines
- Expansion of warehouse floor space
- Unmeasured results or savings
Self-check
- Does every pallet position have an address?
- Can the system show which positions are occupied and which are free?
- Does the system suggest a location when goods are received?
- Are fast-moving goods stored close to the shipping area?
- Do pallet search incidents occur?
- Are 1C stock balances visible by location?
- Is stocktaking carried out without stopping warehouse operations?
- Is warehouse occupancy measured as a percentage?
- Is every operation confirmed by scanning?
- Is there a person responsible for the warehouse?
Warehouse audit
We measure the pallet positions, occupancy and processes in your warehouse and show where capacity can be recovered.
- Occupancy and location map
- Put-away recommendations
- WMS implementation plan: implementation fee and monthly subscription
Other solutions in this industry
- OD-02Marked goods in wholesale trade
- OD-03Distribution: dispatch and returns
- OD-04Stock accuracy: cycle counting instead of an annual stocktake
- OD-05Warehouse Staff and Productivity
- OD-06ESF and ETTN: shipment documents
- OD-07E-commerce fulfillment: piece picking and returns
- OD-08Cold storage: temperature and batch tracking
- OD-09Dock and yard: truck queues
- OD-103PL warehouse: accurate billing for services
Sources
- World Bank, Uzbekistan Private Sector Diagnostic. spot.uz, 17.07.2026.
- IBC Global, Central Asia Warehouse Summit (Tashkent). bizmedia.kz, 20.04.2026.
- Commonwealth Partnership Uzbekistan, Tashkent warehouse market review, 2024. spot.uz, 10.03.2025.