Industries · Building materials
Every tonne, with its energy, batch and documents.
For cement, brick and ready-mix concrete plants. We measure kiln and mill consumption by shift, link each batch to its test results, and bring the exchange contract, weighbridge and ESF (electronic invoice) for each shipment into a single record.
Who it is for: Plant director, chief power engineer, chief process engineer, laboratory head, shipping department and chief accountant.
Industry figures
According to Anhor.uz, cement capacity utilisation did not exceed this level in 2024.1
Cement volumes must be sold through the commodity exchange; the requirement has been extended to 01.01.2028.2
Enterprises producing and supplying unsafe materials, according to the register (February 2026).3
Industry challenges
The market sets the price. The plant sets the cost.
In a market where capacity exceeds demand, the selling price is outside the plant's control. What remains in its control is the gas, electricity and downtime per tonne. If these are not measured by kiln, mill and shift, they cannot be managed.1
QM-02 Energy consumption and cost per tonneSold. Now it must be loaded on time.
At least half of cement is sold through the exchange. There have been cases where the competition authority found failure to load on time under an exchange contract to be a violation. Queue, weighbridge and documents must form a single chain.2, 4
QM-01 From exchange contract to loadingQuality is in the lab. Liability is in the shipment.
A manufacturer entered in the register of materials that do not meet safety requirements cannot take part in public procurement. Being able to show which batch, with which test result, went to which customer is now a commercial matter.3, 5
QM-03 Batch and quality passportUnplanned downtime is the most expensive hour.
Equipment gives signals before it stops. If the cause and duration of each stoppage are not recorded, both spare-parts stock planning and predictive analysis rely on guesswork.
QM-06 Predictive maintenanceIf gas is restricted, the fuel mix must be accounted for.
In winter 2025–2026, the gas shortfall reached about 6 million m³ per day. If each fuel type is not accounted for separately when fuels are switched, its effect on kiln operation, quality and cost cannot be assessed.6
QM-10 Alternative fuel and fuel blend managementConcrete does not wait.
Once ready-mix concrete leaves the plant, it is a time-limited product. If orders, mixer trucks and delivery notes are not in one system, the dispatcher cannot anticipate empty trips and delays.
QM-07 Ready-mix concrete dispatching
Solutions
The solutions for this industry are grouped into platforms. Full documents and PDF briefs are in the library.
Plant Pulse
Line and energy monitoring
8 solutionsGoods Flow
Warehouse, documents and shipping
- From exchange contract to loading
- Batch and quality passport
- Digitising construction materials procurement
Global practice
According to the vendor · ABB
ABB Expert Optimizer has been used on more than 200 cement production lines.7
According to the vendor · FLSmidth
At the Çimentaş İzmir plant, FLSmidth ECS/ProcessExpert reduced energy use in the raw mill by up to 3.8%.8
According to the vendor · Carbon Re (now Gigaton)
Among Carbon Re's AI process control customers, specific heat consumption fell by 5.4% and the alternative fuel share rose by 3.8%.9
According to the vendor · Visionaize
According to the company's statement, heat consumption fell from 820 to 740 kcal/kg, mill and kiln downtime fell by 60%, and refractory lining service life increased by 50%.10
According to the vendor · Sysdyne
Sysdyne offers cloud dispatching, remote batching control, GPS tracking and electronic delivery note modules; ConcreteGo is used at more than 700 plants.11
According to the vendor · Comstruct
Comstruct (Munich) is a building materials procurement platform; using ML, it connected 800 suppliers in two years.12
These results refer to the vendor's own customers. They are not guaranteed at any other company; results for a given plant can only be assessed after its own baseline has been measured.
Industry in practice
Real problems. Published projects.
Independent examples published by the companies named below. These are not MEENTAKA projects or partnerships. Reported results apply to each site; a local assessment is needed before setting targets.
Siemens · 2023
Amberg: quality inspection without an extra X-ray machine
Electronics Works Amberg · Germany
€500,000 capital investment avoided, according to Siemens.
- The problem
- X-ray inspection of circuit boards was constraining production throughput.
- What changed
- Process data trained an AI model to estimate defect likelihood and determine when additional inspection was needed.
- What to assess at your site
- Check defect labels, traceability and false-negative rates before using predictions to change an inspection plan.
How we start
- 01
Audit
We review existing data from meters, weighbridges, the laboratory log, the warehouse and 1C.
Outcome: map of measurement points and data gaps.
- 02
Pilot
On one kiln, mill, product type or gate. Duration and KPIs are agreed during the audit.
Outcome: baseline KPIs and first measured differences.
- 03
Scale-up
Once pilot results are confirmed, the remaining sections, warehouses and loading points are connected.
Outcome: single plant-wide accounting.
- 04
Subscription
Monthly report, support and tracking of recommendation implementation.
Outcome: KPI trends.
What we do not promise
- Exact timeline and price without an audit
- Unmeasured results or savings
- Replicating results announced by vendors
- Repair of plant equipment
- Exchange rules and government decisions
- Gas supply
- Energy tariffs
- Certification and test results
Plant audit
We review meter, weighbridge, laboratory and 1C data to show where losses occur and where to start.
- Map of measurement points and data gaps
- Pilot plan for one section
- Implementation fee and monthly subscription
Sources
- Anhor.uz, «Chinese cement boom: the industry on the brink of crisis» (based on Uzpromstroymateriallar and statistics data), 04.02.2026.
- Presidential Decree UP-269 of 20.12.2025 (extension of the exchange trading requirement). spot.uz, 09.01.2026.
- Inspectorate for Control in Construction and Housing and Utilities (UJKX): register of construction materials that do not meet safety requirements. spot.uz, 25.02.2026.
- Decision of the Committee for Competition Development and Consumer Protection. spot.uz, 22.10.2026; uza.uz.
- Presidential Resolution on the development of the building materials industry (PQ-365). spot.uz, 03.12.2025; buxgalter.uz.
- Ministry of Energy data: 2025–2026 winter gas restrictions. spot.uz, 26.02.2026.
- ABB: «Advanced process control with cpmPlus Expert Optimizer» (more than 200 cement lines). library.e.abb.com.
- FLSmidth / Pacpro: «Advanced Process Control Implementation at Çimentaş İzmir», case study, 2022.
- Carbon Re (now Gigaton): «AI co-pilot for plant optimisation», partner material. cemnet.com, 2025.
- Visionaize Inc. press release: AI and digital twins in cement production. newswire.com, 21.10.2026.
- Sysdyne Technologies profile (based on company information). datadrivenaec.com, 2026.
- «Comstruct, a platform to digitize the construction industry, raises $13.5 million». TechCrunch, 06.02.2025.