Food · OQ-04 · Flour mills: energy and flour extraction
One percentage point of flour extraction can equal a year's profit.
In January–February 2026, large enterprises produced 210.7 thousand tonnes of flour, 56.2% more. Most of a mill's energy goes to grinding. Bühler has stated that its digital mill reduces grinding energy by up to 10%.
Platform: Plant Pulse
Who it is for
- Mill owner
- Production cost.
- Process engineer
- Recipes and extraction.
- Energy manager
- Electricity.
- Quality
- Flour quality.
Where the problem lies
Extraction not measured
Wheat in and flour out are not compared by shift.
Energy tracked only in total
kWh is not divided by tonnes.
Idle running
Roller mills run without load.
Recipe
Wheat blending and moisture control are manual.
How the loss is calculated
| Extraction | (planned − actual extraction) % × tonnes of wheat milled per period × flour price per tonne |
|---|---|
| Energy | kWh/t × tariff per kWh = energy cost per tonne |
| Idle running | idle hours per period × power draw (kW) = wasted kWh per period |
| Quality | tonnes downgraded to lower grade per period × price difference per tonne |
Calculate with your data
Flour mill: flour extraction gap and its value
This calculator compares actual flour extraction for a chosen period with a target extraction rate that you set yourself.
Use spaces for thousands and a dot or comma for decimals. Use the same currency throughout.
Values stay in this page and are not sent to the server.
Scenario estimate
0 / 5 values entered
Enter your operating figures to see the estimate.
You enter the target extraction yourself. It is not a guaranteed achievable figure and depends on wheat quality, grade requirements and equipment. Wheat tonnage and extraction % must be measured on the same basis, for example cleaned and tempered wheat weighed at the first break. For values, enter net realisable value rather than list price, meaning the ex-mill price after selling and freight costs. Extra flour only turns into money if there is demand to buy it. The result shows a value exposure, not guaranteed savings. It does not promise any audit, certification, inspection or export outcome.
Formulas and assumptions
This calculator compares actual flour extraction for a chosen period with a target extraction rate that you set yourself. It estimates only that gap: the tonnes that left the mill as bran or other by-products instead of flour, and the value difference between flour and by-product on those tonnes. All values refer to one period of your choice, such as a shift, a month or a year. Energy, idle running, flour grade (quality) differences and moisture changes are not included. The result is an estimate, not a promise.
- Actual flour output
- Wheat milled (t) × actual extraction (%) ÷ 100.
- Flour at target extraction (scenario)
- Wheat milled (t) × target extraction (%) ÷ 100. This is a scenario based on your own target, not a forecast.
- Extraction gap: tonnes not recovered as flour
- (Target extraction % − actual extraction %) ÷ 100 × wheat milled (t). If actual extraction is above target, the result is 0.
- Value exposure of the extraction gap
- Extraction gap (t) × (flour value − by-product value, currency/t). These tonnes are not lost; they are sold as lower-value by-product, so only the value difference is counted. A negative value difference is treated as 0.
Facts and global practice
National Statistics Committee
January–February 2026: 210.7 thousand t of soft wheat flour, +56.2%.1
Bühler (millermagazine.com)
Bühler: with Mill E3, grinding energy falls by up to 10% and whole-mill energy by 7–10% (at the same extraction and quality).2
foodengineeringmag.com; Bühler
Whitworth Bros (United Kingdom): more than 15,000 data points in its Mill E3 mill; the extraction management system shows differences between recipes.2
This indicator was not found in open sources for Uzbek enterprises — it is measured during the audit.
Every tonne tracked for energy and extraction
Data is collected from scales and electricity meters, and flour extraction and kWh/t are calculated per shift.
- 01Intake
- Wheat
- Moisture
- Scale
- 02Grinding
- Roller mill
- Electricity
- Load
- 03Output
- Flour
- Bran
- Grade
- 04Report
- Shift
- kWh/t
- Extraction %
Modules
The current maturity level is shown next to each module.
| Electricity meters | Per line | Engineering capability |
|---|---|---|
| Scale integration | Intake and output | Engineering capability |
| Extraction report | Per shift | Engineering capability |
| Warehouse (WMS) | Flour and bran | Commercially available |
How we start
- 01
Energy audit
Meters.
Outcome: Baseline.
- 02
Pilot
1 month.
Outcome: kWh/t and extraction.
- 03
Scale-up
Whole mill.
Outcome: Full coverage.
- 04
Subscription
Monthly.
Outcome: Trends.
What is measured
| Flour extraction | % | Scale |
|---|---|---|
| Energy | kWh/t | Meter |
| Idle running | Hours | Monitoring |
| Grade share | % | Quality |
What is needed to start
- Mill owner
- Electrical diagram
- Scales
- Shift schedule
What we do not promise
- Exact timeline and price without an audit
- Certificate or inspection result
- Guarantee of export permission
- Unmeasured results
Self-check
- Is flour extraction measured per shift?
- Is kWh/t known?
- Is roller mill idle running visible?
- Is wheat moisture recorded?
- Are the scales connected to the system?
- Are recipes compared?
- Is the energy limit monitored?
- Is bran accounting accurate?
- Are shifts compared?
- Is there a responsible person?
Mill energy audit
We measure your mill's energy and extraction and show where the losses are.
- Map of break points
- Pilot plan
- Implementation fee and monthly subscription
Other solutions in this industry
- OQ-01Fruit and vegetable cold stores: temperature and lot control
- OQ-02Fruit and vegetable exports: lot traceability and quality evidence
- OQ-03Vegetable oil: warehouse and line readiness for 2027
- OQ-05Dairy plants: milk intake, temperature and cleaning-in-place (CIP)
- OQ-06Digital HACCP logs
- OQ-07Processing lines: full utilisation during the season
- OQ-08Gas and electricity control in food plants
- OQ-09Finished goods warehouse: expiry dates and FEFO
- OQ-10Raw material intake: scales, quality and cameras
Sources
- National Statistics Committee: 210.7 thousand t of flour in January–February 2026 (+56.2%). stat.uz, 22.04.2026.
- Bühler: Mill E3 — up to 10% less grinding energy; more than 15,000 data points in the Whitworth Bros mill. millermagazine.com; foodengineeringmag.com.