Food · OQ-05 · Dairy plants: milk intake, temperature and cleaning-in-place (CIP)
Milk is the most perishable raw material.
In January–February 2026, cheese and tvorog (cottage cheese) production rose by 35%. The zero import duty rate on dairy products has been extended until 2027. Under these conditions, a local plant needs to manage intake, cooling and cleaning processes with data.
Platform: Plant Pulse
Who it is for
- Plant owner
- Cost.
- Intake
- Milk quality.
- Process technologist
- Process.
- Quality
- Laboratory.
Where the problem lies
Intake
Milk volume and fat content are recorded by hand.
Cooling
Tank temperature is not recorded continuously.
CIP
Cleaning duration and chemical consumption are not measured.
Batch
It is unknown which milk the finished product was made from.
How the loss is calculated
| Spoiled milk | litres spoiled × price per litre |
|---|---|
| Fat content deviation | fat deviation (percentage points) × litres × price per litre per percentage point |
| CIP | CIP hours per period × number of lines × cost per line-hour + chemicals cost + water cost |
| Returns | returned batches × cost per batch |
Calculate with your data
CIP cleaning time: line hours occupied and potentially freed per month
This calculator estimates how many line hours per month are taken up by CIP cleaning cycles.
Use spaces for thousands and a dot or comma for decimals. Use the same currency throughout.
Values stay in this page and are not sent to the server.
Scenario estimate
0 / 5 values entered
Enter your operating figures to see the estimate.
This is an estimate, not a guarantee. The target CIP time has not been shown to be achievable. Any shorter cleaning time must be validated first and must not compromise HACCP or hygiene requirements. Freed hours generate value only if raw milk, staff and demand are available. No certification, inspection or export outcome, and no timeline for one, is promised.
Formulas and assumptions
This calculator estimates how many line hours per month are taken up by CIP cleaning cycles. It compares your current cycle duration with a target duration that you set yourself. Take all values from your own monitoring data. The period is one month. Freed hours are valued only at contribution margin, and only for additional output that can actually be sold. Chemicals, water, energy, labour, quality and hygiene risks are excluded.
- Line hours occupied by CIP – current
- Cycles per month multiplied by current duration (minutes), divided by 60. The result is hours per month.
- Line hours occupied by CIP – target scenario
- Cycles per month multiplied by your target duration (minutes), divided by 60. The number of cycles is assumed unchanged.
- Potentially freed line hours
- Cycles multiplied by the difference between current and target duration (minutes), divided by 60. Negative results are set to zero.
- Potential contribution-margin value of freed hours
- Freed hours (hours/month) multiplied by the usable share (% / 100) and by the contribution margin per hour. This is neither revenue nor guaranteed profit. The value arises only if the extra output is actually sold.
Facts and global practice
National Statistics Committee
January–February 2026: 831.2 t of cheese and cottage cheese, +35%.1
uza.uz (dairynews.today)
The zero import duty rate on dairy products has been extended until 01.01.2027.2
gov.uz/standart
The Uzbek Agency for Standardisation has published the mandatory EU requirements for meat and dairy products.3
This indicator for Uzbek enterprises was not found in open sources — it is measured during the audit.
From intake to finished product
Volume and quality are entered into the system at intake, tank temperature is recorded continuously, CIP cycles and resource consumption are logged, and batch traceability is maintained.
- 01Intake
- Supplier
- Volume
- Fat content
- 02Storage
- Tank
- Temperature
- Time
- 03Production
- Batch
- CIP
- Resources
- 04Warehouse
- Shelf life
- FEFO
- Shipment
Modules
The current maturity level is shown next to each module.
| Intake and supplier records | Scale/flow meter | Engineering capability |
|---|---|---|
| Tank temperature | Sensor | Engineering capability |
| CIP monitoring | Time, water, chemicals | Engineering capability |
| Finished goods warehouse (FEFO) | WMS | Commercially available |
How we start
- 01
Audit
Intake and tanks.
Outcome: gaps.
- 02
Pilot
1 month.
Outcome: temperature and CIP baseline.
- 03
Scale-up
Entire plant.
Outcome: batch traceability.
- 04
Subscription
Monthly.
Outcome: trends.
What is measured
| Temperature deviation | Hours | Sensor |
|---|---|---|
| CIP time | Minutes | Monitoring |
| Fat content deviation | % | Intake |
| Expired | Batch | WMS |
What is needed to start
- Plant owner
- Intake process
- List of tanks
- CIP diagram
What we do not promise
- Exact timeline and price without an audit
- Certificate or inspection outcome
- Guarantee of export approval
- Unmeasured results
Self-check
- Is volume recorded automatically at intake?
- Is there a quality history for each supplier?
- Is tank temperature recorded continuously?
- Is CIP duration measured?
- Are chemical and water consumption known?
- Is it visible which milk each batch was made from?
- Is finished product managed by FEFO?
- Are laboratory results recorded in the system?
- Have export requirements been reviewed?
- Is there a designated responsible person?
Dairy plant audit
We review milk intake, temperature and the CIP process.
- Map of break points
- Pilot plan
- Implementation fee and monthly subscription
Other solutions in this industry
- OQ-01Fruit and vegetable cold stores: temperature and lot control
- OQ-02Fruit and vegetable exports: lot traceability and quality evidence
- OQ-03Vegetable oil: warehouse and line readiness for 2027
- OQ-04Flour mills: energy and flour extraction
- OQ-06Digital HACCP logs
- OQ-07Processing lines: full utilisation during the season
- OQ-08Gas and electricity control in food plants
- OQ-09Finished goods warehouse: expiry dates and FEFO
- OQ-10Raw material intake: scales, quality and cameras
Sources
- National Statistics Committee: 831.2 t of cheese and cottage cheese in January–February 2026 (+35%). stat.uz, 23.04.2026.
- The zero import duty rate on dairy products has been extended until 01.01.2027 (decree of 30.12.2025). uza.uz (via dairynews.today).
- Uzbek Agency for Standardisation: mandatory EU requirements for meat and dairy products. gov.uz/standart.