Textiles · TX-05 · AI fabric inspection
Defects must be found before cutting.
Garment manufacturers worldwide are replacing manual fabric inspection with line-scan camera and AI systems. The defect map is passed through to the cutting stage. Fabric production in Uzbekistan is growing rapidly.
Platform: Plant Pulse
Who it is for
- Head of Quality
- Defect statistics.
- Cutting room
- Fabric utilisation.
- Procurement
- Supplier claims.
- CEO
- Returns.
Where the problem lies
Sample inspection
Only part of each roll is inspected.
No defect map
Defect locations do not reach cutting.
Supplier
Defective roll statistics are not collected for supplier claims.
Shade variation
Shade variation between lots is detected late.
How the loss is calculated
| Cut parts | defective cut parts per month × cost per part |
|---|---|
| Returns | returned orders per month × order value |
| Claims | value of defective rolls not returned to the supplier per month |
| Inspection | inspection hours per month × number of inspectors × hourly rate |
Calculate with your data
Cost of Cut Pieces Scrapped Due to Fabric Defects
This calculator estimates one type of loss per month.
Use spaces for thousands and a dot or comma for decimals. Use the same currency throughout.
Values stay in this page and are not sent to the server.
Scenario estimate
0 / 4 values entered
Enter your operating figures to see the estimate.
The results are estimates, not promises, and are only as reliable as the values you enter. Enter the cost basis per piece, such as fabric, cutting and other costs incurred, not the selling price. The results do not predict the detection rate of any AI equipment. They do not guarantee savings, compliance with buyer requirements or certification. A reliable assessment requires your own measured data and an audit.
Formulas and assumptions
This calculator estimates one type of loss per month. It covers the cost basis of cut pieces scrapped because a fabric defect was not detected before cutting, minus any value recovered through rework or salvage. Enter the current monthly piece count from your quality records. The target count is also your own figure, and the calculator does not claim the target is achievable. Customer returns, supplier claims, inspection labour, investment and payback are excluded.
- Current monthly loss
- Current scrapped pieces (pieces/month) × (cost basis per piece − value recovered per piece, currency/piece). A negative difference is treated as zero.
- Monthly loss in target scenario
- Your target scrapped pieces (pieces/month) × (cost basis per piece − value recovered per piece, currency/piece). This is not a guaranteed outcome.
- Monthly difference between current and target
- (Current − target scrapped pieces, pieces/month) × (cost basis per piece − value recovered per piece, currency/piece). Negative values are set to zero. This shows estimated loss exposure, not confirmed savings.
Facts and global practice
National Statistics Committee
Cotton fabric output in January–September 2026 was 94.2 mn m², compared with 72.5 mn m² last year.1
OSHIMA press release
OSHIMA EagleAi detects, maps and classifies more than 20 defect categories in woven, knitted and elastic fabrics.2
OSHIMA press release
Defect data is sent to a cloud platform and projected onto the fabric before cutting; the system integrates with MES and ERP.2
Briefglance (on OSHIMA)
Data cited by Briefglance: AI detection above 90% versus 60–70% for manual inspection; inspection 6 times faster.2
The detection rate is a vendor claim. Model testing is required for each fabric type.
Defect data travels with the roll
AI inspection equipment is supplied by a partner. MEENTAKA links defect data to the roll, warehouse and cutting.
- 01Inspection
- Camera
- AI
- Defect category
- 02Roll
- Lot
- Storage location
- Grade
- 03Cutting
- Map
- Fabric-saving nesting
- Cut parts
- 04Report
- Supplier
- Claim
- Statistics
Modules
The current maturity level is shown next to each module.
| Roll warehouse (WMS) | Lot and location | Commercially available |
|---|---|---|
| Linking defect data | From partner equipment | In development |
| Supplier rating | For claims | Engineering capability |
| AI inspection equipment | Partner | In development |
How we start
- 01
Quality audit
Inspection process.
Outcome: defect statistics.
- 02
Pilot with partner
One fabric type.
Outcome: detection rate.
- 03
Integration
Warehouse and cutting.
Outcome: full chain.
- 04
Subscription
Monthly report.
Outcome: trend.
What is measured
| Defective rolls | Share | System |
|---|---|---|
| Defects at cutting | Cut parts | Control |
| Claims | Amount | Procurement |
| Inspection time | Per roll | System |
What is needed to start
- Head of Quality
- List of fabric types
- List of suppliers
- Warehouse layout
What we do not promise
- Exact timeline and price without an audit
- Guarantee of meeting buyer requirements
- Certification
- Unmeasured results or savings
- Detection rate of the AI equipment
Self-check
- Is every roll fully inspected?
- Are defect locations recorded?
- Does defect data reach cutting?
- Are suppliers rated on defects?
- Is the stage at which shade variation is detected known?
- Is roll grade recorded in the system?
- Are claim statistics kept?
- Is the number of inspectors sufficient?
- Are the causes of returned orders analysed?
- Is there a designated responsible person?
Quality audit
We review fabric inspection and roll records and show where defects are slipping through.
- Defect statistics
- Partner pilot plan
- Implementation fee and monthly subscription
Other solutions in this industry
- TX-01From fibre to garment: the lot trail
- TX-02Digital Product Passport readiness
- TX-03Gas restrictions and energy planning
- TX-04Sewing line: piece counting and productivity
- TX-06Yarn and fabric warehouse
- TX-07Warehousing and shipping for e-commerce exports
- TX-08Working capital and inventory transparency
- TX-09Quality laboratory and batch certificate
- TX-10Export order tracking
Sources
- National Statistics Committee: industrial production press release, January–September 2026. stat.uz, 30.10.2026.
- OSHIMA press release: EagleAi fabric inspection (Texprocess 2026). taiwannews.com.tw, 30.04.2026; briefglance.com.