Building materials · QM-02 · Energy consumption and cost per tonne

The market sets the price. The plant sets the cost.

In a market where capacity exceeds demand, a plant cannot control its selling price. What remains in its hands is the gas, electricity and downtime spent per tonne. These cannot be managed without measurement.

Platform: Plant Pulse

46%

According to Anhor.uz, cement capacity utilisation did not exceed this level in 2024.1

34

Large enterprises that have undergone an energy audit; they account for roughly 65% of the sector's electricity consumption.2

7% / 4%

Interest compensation on loans for replacing energy-intensive kilns and mills (UZS / foreign currency).2

An energy audit is done once. Consumption changes every shift.

Who it is for

CEO
Cost per tonne and profitability.
Chief Engineer
Kiln and mill operating modes.
Chief Power Engineer
Gas and electricity consumption.
CFO
Energy costs and loans.

Where the problem lies

  • Single plant meter

    Gas and electricity are a single figure for the whole plant, not broken down by area.

  • Shifts are invisible

    The same product consumes different amounts on different shifts, and the cause is not identified.

  • Downtime is not accounted for

    Fuel consumed when a kiln stops and is restarted is not counted separately.

  • The audit stays on paper

    Whether energy audit recommendations are implemented and deliver results is not tracked.

How the loss is calculated

Specific consumption(actual m³/t − best-shift m³/t) × tonnes × gas price per m³
Downtimedowntime hours × hourly output (t/h) × margin per tonne
Electricity(actual kWh/t − norm kWh/t) × tonnes × tariff per kWh
Restartsnumber of restarts × consumption per restart

Calculate with your data

Specific Gas Consumption: Cost of Excess Gas per Tonne

This calculator estimates gas cost for one furnace or section over a single period you choose (shift, month or other).

Use spaces for thousands and a dot or comma for decimals. Use the same currency throughout.

Values stay in this page and are not sent to the server.

Scenario estimate

0 / 4 values entered

Enter your operating figures to see the estimate.

The calculation covers gas cost only. It excludes electricity, margin lost to downtime, restart consumption, repairs and investment costs. These are different kinds of loss and are not added to this result. Reaching the reference consumption is not guaranteed: it depends on raw material, load, equipment condition and gas supply, and must be confirmed by an audit and by measurement. Tonnes, consumption and price must all refer to the same period and the same section. Gas prices and tariffs can change, so use the price on your current invoice.

Formulas and assumptions

This calculator estimates gas cost for one furnace or section over a single period you choose (shift, month or other). It compares your metered actual specific consumption (m³/t) with a reference value you set yourself, for example your best measured shift. You enter all values from your own meters, logs and 1C data. Results are estimates, not promises.

Gas cost at actual consumption
Tonnes × actual consumption (m³/t) × gas price (UZS/m³) = gas cost for the chosen period, in UZS.
Gas cost at reference consumption
Tonnes × reference consumption (m³/t) × gas price (UZS/m³). This is the gas cost if the same output were produced at the reference consumption; it is not a forecast.
Gas cost above reference
max(actual − reference consumption, 0) (m³/t) × tonnes × gas price (UZS/m³). The result is 0 if actual consumption is below the reference. This is an estimate based on the measured gap, not a saving.
Gas volume above reference
max(actual − reference consumption, 0) (m³/t) × tonnes = gas volume used above the reference in the period, in m³.

Facts and global practice

  • Anhor.uz (Uzpromstroymateriallar)

    Design capacity of cement plants is 40.5 million t; output in 2024 was 17.9 million t; capacity utilisation did not exceed 46%.1

  • Anhor.uz

    The exchange price fell to approximately $47 per tonne in January 2026.1

  • Modernisation programme

    Energy audits have been carried out at 34 large enterprises, saving 240 million kWh last year; audits are planned at another 38 enterprises.2

  • Presidential decree

    From 2026, UZS 100 billion will be allocated annually for AI, digital systems, automation and energy audits in building materials production.3

  • Ministry of Energy

    In winter 2025–2026, the gas shortfall reached approximately 6 million m³ per day.4

  • Ministry of Energy

    A brick plant was disconnected from gas during the winter restriction period; a criminal case was opened over illegal reconnection.5

Energy costs and supply risks persist. Meanwhile, the state is funding energy audits and digitalisation — a good time to introduce a measurement system.

Consumption for every tonne

Data is collected automatically from meters and linked to production volume. The result: cost per tonne by kiln, mill and shift.

  1. 01Measurement
    • Gas meters
    • Electricity meters
    • Production volume
  2. 02Linking
    • Kiln and mill
    • Shift
    • Product type
  3. 03Analysis
    • m³/t and kWh/t
    • Downtime
    • Best shift
  4. 04Management
    • Cost dashboard
    • Audit recommendations
    • Monthly report

Modules

The current maturity level is shown next to each module.

Meter data collectionExisting and new meters (via a partner)Engineering capability
Cost dashboardBy shift, day and tonneEngineering capability
Tracking energy audit recommendationsAction, deadline, resultEngineering capability
1C integrationProduction and cost dataCommercially available

How we start

  1. 01

    Energy audit

    Meters, production areas and available data are reviewed.

    Outcome: measurement map.

  2. 02

    Pilot on one line

    One kiln or mill for 60 days.

    Outcome: consumption by shift.

  3. 03

    Scale-up

    All production areas.

    Outcome: plant-wide cost per tonne.

  4. 04

    Subscription

    Monthly report, recommendation tracking.

    Outcome: consumption trend.

What is measured

Gas consumptionm³ per tonne, by kilnMeter
Electricity consumptionkWh per tonne, by areaMeter
DowntimeHours and causeLog
Cost per tonneEnergy component, UZS/tSystem, 1C
Audit actionsCompleted / plannedSystem

What is needed to start

  • Chief Power Engineer or responsible person
  • List of meters
  • Energy audit report (if available)
  • Production report

What we do not promise

  • Exact timeline and price without an audit
  • Exchange rules and government decisions
  • Repair of plant equipment
  • Unmeasured results or savings
  • Gas supply
  • Energy tariff

Self-check

  1. Is gas consumption measured separately for each kiln?
  2. Is electricity consumption visible by production area?
  3. Is consumption per tonne calculated every shift?
  4. Are the best and worst shifts known?
  5. Is downtime recorded with its cause?
  6. Is restart consumption calculated?
  7. Is implementation of energy audit recommendations tracked?
  8. Is cost per tonne visible without waiting for month-end?
  9. Has it been calculated in advance which line would stop under a gas restriction?
  10. Is there a person responsible for energy?

Energy audit

We review meters and production data and show where cost per tonne can be measured.

  • Measurement map
  • Pilot plan for one line
  • Implementation fee and monthly subscription

Sources

  1. Anhor.uz, «Xitoy sement buumi: soha inqiroz yoqasida» (China's cement boom: the sector on the brink of crisis; based on Uzpromstroymateriallar and statistics data), 04.02.2026.
  2. Meeting on the modernisation programme for building materials enterprises. anhor.uz, 2026.
  3. Presidential decree on developing the building materials industry (PQ-365). spot.uz, 03.12.2025; buxgalter.uz.
  4. Ministry of Energy data: winter 2025–2026 gas restrictions. spot.uz, 26.02.2026.
  5. Ministry of Energy statement: illegal gas connection by a brick plant. anhor.uz.